1965 Chevrolet C20 3/4 ton pickup 292 6-cylinder engine 4 spd manual transmission New 8 lug custom American outlaw wheels New cooper discover h/t lt245/75r16 tires Toolbox with two sided opening (locking) in bed Original style am/fm radio in dash All lights, gauges, signals, wipers, and horn work Clean new Mexico truck its whole life Truck drives excellent buy it and enjoy! Beautiful example of an original truck
Shown by appointment only - Not Located here at our dealership - Ask today for a Delivery Quote
The 1960 model year introduced a new body style of light pick-up truck that featured many firsts. Most important of these were a drop-center ladder frame, allowing the cab to sit lower, and independent front suspension, giving an almost car-like ride in a truck. Also new for 1960 was a new designation system for trucks made by GM. Gone were the 3100, 3200, and 3600 designations for short 1/2, long 1/2 and 3/4-ton models. Instead, a new scheme assigned a 10, 20, or 30 for 1/2, 3/4, and 1-ton models. Since 1957, trucks were available from the factory as four-wheel drive, and the new class scheme would make this known. A C (conventional) in front of the series number indicates two-wheel rear drive while a K denotes four-wheel drive.
Actual badging on Chevrolet trucks carried the series name system from the previous generation in 1960 and 1961: the 10, 20, 30, and 40 series (C and K) were badged as "Apaches", 50 and 60 series trucks were badged as "Vikings", and the largest 70 and 80 series models were marked "Spartans". In 1960, C/K trucks were available in smooth "Fleetside" or fendered "Stepside" versions. GMC called these "Wide-Side" and "Fenderside." Half-ton models were the C10 and K10 long-bed and short-bed trucks, and The 3/4-ton C20 and K20, as well as the one-ton C30, were also available. GMC did not use the "C" nomenclature, though their 4x4 versions had the "K" designation. GMC model numbers for 1/2, 3/4, 1, and 1.5 ton were 1000, 1500, 2500, and 3000. The 1.5 ton Chevrolet C40 and GMC 3000, which were using the light-duty cab (but only as chassis-cab and stake models), were discontinued for the 1963 model year.
The 1960, 1961, and 1962 models used torsion bar front suspensions, with trailing arm suspension rears. Trim lines were base and "Custom." Engines included the base GMC 305 in3 V6 for the GMC version, 135 hp (101 kW) 236 in3 (3.9 L) and 150 hp (112 kW) 261 in3 (4.3 L) straight-6s, and a 283 in3 (4.6 L) V8 with 185 hp (119 kW).
1966 Chevrolet C-30 dump truck in Porterville, California A coil-spring front suspension came in 1963, along with a new base engine, a 140 hp (104 kW) 230 in3 (3.8 L) I6, and an optional 165 hp (123 kW) 292 in3 (4.8 L) I6. The cab was changed for 1964, with elimination of the "wraparound" windshield and a new front grille design, along with various interior changes, keeping the original design on the body. Air conditioning and a 220 hp (164 kW) 327 in3 (5.3 L) V8 came in 1965. A new base engine finished the model in 1966 with a 155 hp (116 kW) 250 in3 (4.1 L) I6.